MW Audio MW-5082: 8 inch Woofer
8″ black polypropylene cone. This woofer is a great replacement for many Klipsch models.
– 4 ohm models are K-1002-K, K-2-K, K-9-K, KG2, KG3, KG3.2, KG3.5 and many more.
– 8 ohm models are KG4 (K-8-K) and many more.
You may have to remove the rubber gasket on our woofer, some Klipsch cabinets are recessed and this woofer will not fit down in there unless the rubber gasket is removed.
It is a perfect drop in fit with no modification needed to the cabinet. The screw holes match up perfect. Just like the original, it has a stamped basket, poly cone, rubber surround and a large high power magnet. These are new current production stock. The original Klipsch woofers have been discontinued, so we had these custom made for us designed from the original Klipsch woofer. The sensitivity was copied to ensure similar output level and sound. In comparison to the original, it is very close. Overall, it is a great reproduction of the original Klipsch woofer. Some models have the woofers recessed in the cabinet, in this case you will have to remove the rubber gasket on the new replacement woofer for it to fit down in the recessed lip.
Specifications and Small Signal Parameters:
Voice Coil Impedance: 4 ohm
Rated Frequency Response: 35- 4k Hz
Sensitivity: 93 dB SPL (2.83V, 1 meter)
Rated Power: 75 watts
Program Power: 150 watts
Magnet Weight: 570 gr (20 oz)
Fo: 35 Hz
Re: 3.7 ohm
Qts: 0.25
Qms: 4.9
Qes: .27
Vas: 86 liters
Xmax: 6 mm
No: 1.3 %
CMS: 1.051m M/N
MMS: 19.981 q
Voice Coil Impedance: 8 ohm
Rated Frequency Response: 35- 4k Hz
Sensitivity: 92 dB SPL (2.83V, 1 meter)
Rated Power: 75 watts
Program Power: 150 watts
Magnet Weight: 570 gr (20 oz)
Fo: 35 Hz
Re: 6.6 ohm
Qts: 0.27
Qms: 4.6
Qes: .29
Vas: 103 liters
Xmax: 4.5 mm
No: 1.6 %
CMS: 1.251m M/N
MMS: 15.931 q
Speaker Dimensions:
Outside Diameter: 8.3″
Cutout Diameter: 7.1″
Internal Depth: 3.6″
4 ohm Graph:
8 ohm Graph:
