MW Audio MW-7000: 7″ Polk Audio Copy Woofer
This woofer is a great replacement for many Polk Audio woofers.
Here is the list of woofer models and what cabinet models they go into:
4 ohm woofer models are:
– MW7000 : Goes into S4, S6 and more
– MW7002 : Goes into 3000 II, 4000, 5000 Sub, 5000 II Sub and more
– MW7009 : Goes into RT5, RT8, RT20 and more
– MW7015 : Goes into CS1000P and more
8 ohm woofer models are:
– MW7010 : Goes into RT12 and more
– MW7100 : Goes into LS50, LS90 and more
– MW7101 : Goes into several models
PLEASE READ: The unique size 7″ Polk woofers have been discontinued, so we had these custom made for us designed from the Polk Audio woofers. These are new current production stock. The parameters were closely copied to ensure similar output level and sound. In comparison to the original, it is very close. Overall, it is a great reproduction for many of the Polk Audio 7″ woofers. It is a perfect drop in fit with no modification needed to the cabinet. The screw holes match up perfect. This unique aftermarket woofer has a steel basket, polypropylene injected cone, butyl rubber surround, 1.5″ dust cap, a standard ferrite non-shielded magnet and a new foam gasket for a proper seal to the cabinet. Our woofer does not have a shielded magnet. Some Polk models like the MW7009 have a shielded magnet, but a shielded magnet only matters if it is near an old tube style TV or monitor.
Specifications and Small Signal Parameters:
Voice Coil Impedance: 4 ohm
Voice Coil Diameter: 1″ (25.5mm) Aluminum Former
Rated Frequency Response: 49- 6k Hz
Sensitivity: 89.4 dB SPL
Rated Power: 50 watts
Magnet Weight: 450 g (15.9 oz)
Net Weight: 1090 g (38.5 oz)
Fs: 49.8 Hz
Re: 3.4 ohm
Qts: 0.43
Qms: 3.58
Qes: .49
Vas: 23.0 liters
Xmax: 3.75 mm
No: 0.56 %
Voice Coil Impedance: 8 ohm
Voice Coil Diameter: 1″ (25.5mm) Aluminum Former
Rated Frequency Response: 51- 6k Hz
Sensitivity: 88 dB SPL
Rated Power: 50 watts
Magnet Weight: 450 g (15.9 oz)
Net Weight: 1090 g (38.5 oz)
Fs: 51.8 Hz
Re: 6.8 ohm
Qts: 0.53
Qms: 3.48
Qes: .63
Vas: 18.5 liters
Xmax: 3.6 mm
No: 0.39 % Speaker
Dimensions:
Outside Diameter: 6.73″ (171mm)
Cutout Diameter: 5.625″ (143mm)
Internal Depth: 2.83″ (72mm)
