JBL 10 inch 127H-1 127H-2 127H-3 Refoam Kit
This kit will fit JBL 10″ speaker models that have an angled attachment to cone.
This kit comes with 3.2″ paper dust caps. If you have the JBL 127H woofer, you will need 4.124″ paper dust caps (see other kit).
Woofer Part #’s:
– 127H-1, 127H-2 and 127H-3 woofer.
Cabinet Models:
– L80T, L80T3, L80S, XPL160A, 4410, 4410A, 8340, 8340A and more speaker cabinets.
Each Refoam Kit includes all the materials needed to repair two (2) speakers:
– Refoaming Instructions
– 2 Foam Surrounds
– Shims for Centering the 2″ Voice Coils (If Selected)
– Two 3.2″ Paper Dust Caps (If Selected)
– 1 Bottle of Specially Formulated Foam Surround Adhesive (Dries Clear)
– 1 Bottle of Black Dust Cap Glue (To retain the original JBL look) (If Selected)
*It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. Also, be careful when cutting off the old dust cap, so you do not cut thru the cone.
A – Outside diameter of the surround = 9.5″
B – Roll ends = 9″
C – Roll starts / O.D. of the cone = 7.625″
D – Inside diameter of the surround = 7.125″