ESB Model 7/05 Refoam Kit
This kit will fit ESB Model 7/05 speakers. The 12″ cones have a slight angle on the woofers and passives.
This kit will fit:
– Model 07/05.
This Refoam Kit includes all the materials needed to repair two (2) mids, two (2) woofers and two (2) Passive Radiators:
– Refoaming Instructions
– Two 8″ Foam Surrounds (F8-2)
– Four 12″ Foam Surrounds (F12-4)
– Shims for Centering the 1.5″ Voice Coils for the mids (If selected)
– Shims for Centering the 2″ Voice Coils for the woofers (If selected)
– Two 2.25″ Felt Dust Caps for the mids (If selected)
– Two 4.5″ Felt Dust Caps for the woofers (If selected)
– 1 Big Bottle of Specially Formulated Foam Surround Adhesive
*It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. Also, be careful when cutting off the old dust cap, so you do not cut thru the cone.
8″ Midranges (F8-2):
A – Outside diameter of the surround = 7.75″
B – Roll ends = 6.938″
C – Roll starts / O.D. of the cone = 6″
D – Inside diameter of the surround = 5.5″
Angled attachment to the cone
12″ Woofers and Passives (F12-4):
A – Outside diameter of the surround = 11.625″
B – Roll ends = 10.75″
C – Roll starts / O.D. of the cone = 9.625″
D – Inside diameter of the surround = 9″
Cones have a slight angle
