Eminence GA10-SC59: 10″ Alnico Guitar Speaker by George Alessandro
Circa 1959 tone in a vintage American alnico magnet design approved by George Alessandro. Tight, punchy, percussive lows and top end chime with sparkle. A nice bright musical Tweed tone.
Click Here to Download PDF Spec Sheet
SPECIFICATION | |
Nominal Basket Diameter | 10″, 254 mm |
Nominal Impedance* | 8 Ω |
Power Rating* | |
Program Power | N/A |
Watts | 20 W |
Resonance | 102 Hz |
Usable Frequency Range | 100 Hz – 5.3 kHz |
Sensitivity* | 97 dB |
Magnet Weight | 6 oz. |
Gap Height | 0.25″, 6.35 mm |
Voice Coil Diameter | 1″, 25 mm |
THIELE & SMALL PARAMETERS | |
Resonant Frequency (fs) | 102 Hz |
DC Resistance (Re) | 7.58 Ω |
Coil Inductance (Le) | 0.44m H |
Mechanical Q (Qms) | 19.66 |
Electromagnetic Q (Qes) | 1.67 |
Total Q (Qts) | 1.54 |
Compliance Equivalent Volume (Vas) | 27.91 liters / 0.99 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 58.21 cc |
Mechanical Compliance of Suspension (Cms) | 0.15 mm/N |
BL Product (BL) | 6.94 T-M |
Diaphragm Mass Inc. Airload (MMs) | 17 grams |
Efficiency Bandwidth Product (EBP) | 61 |
Maximum Linear Excursion (Xmax) | 1.59 mm |
Surface Area of Cone (Sd) | 366.1 cm2 |
Maximum Mechanical Limit (Xlim) | 0 mm |
MOUNTING INFORMATION | |
Recommended Enclosure Volume | |
Sealed | Acceptable |
Vented | Acceptable |
Driver Volume Displaced | 0.027 cu.ft. / 0.77 liters |
Overall Diameter | 10.11″, 256.8 mm |
Baffle Hole Diameter | 9.13″, 231.9 mm |
Front Sealing Gasket | Yes |
Rear Sealing Gasket | Yes |
Mounting Holes Diameter | 0.22″, 5.6mm |
Mounting Holes B.C.D. | 9.6″, 243.8mm |
Depth | 4.8″, 121.9 mm |
Net Weight | 2.9 lbs, 1.32 kg |
Shipping Weight | 4 lbs, 1.81 kgs |
MATERIALS OF CONSTRUCTION | |
Coil Construction | Copper voice coil |
Coil Former | Paper former |
Magnet Composition | Alnico magnet |
Core Details | Non-vented core |
Basket Materials | Pressed steel basket |
Cone Composition | Full molded Paper cone |
Cone Edge Composition | Paper cone edge |
Dust Cap Composition | Solid composition felt dust cap |