Genesis Model Refoam Kit
This is the correct kit that fits on the 8″ woofers and the 10″ passive radiators. Both woofers and passives are angled attached to the cone.
Models include:
– Model 22, Model 33, Model 44, Model 210 and more.
Each Refoam Kit includes all the materials needed to repair two (2) woofers and two (2) passive radiators:
– Refoaming Instructions
– Two 8″ and Two 10″ Foam Surrounds (Both are angled attached to the cone)
– Shims For Centering the 1″ Voice Coils (if selected)
– Two 1.9″ Paper Dust Caps for the Woofers (if selected)
– 1 Bottle of Specially Formulated Foam Surround Adhesive
*It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing.
8″ Woofer
A – Outside diameter of the surround = 7.75″
B – Roll ends = 6.938″
C – Roll starts / O.D. of the cone = 6″
D – Inside diameter of the surround = 5.5″
Angled attachment to the cone
10″ Passive Radiator
A – Outside diameter of the surround = 9.75″
B – Roll ends = 8.875″
C – Roll starts / O.D. of the cone = 7.75″
D – Inside diameter of the surround = 7.125″
Angled attachment to the cone
